Rathnagiri Chemicals
RCPL - ANTOX - 22M46

Section 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION :

Chemical Name : 2,2’-methylenebis[6-t-butyl-4-methylphenol] [RCPL-ANTOX-22M46]

Company Identification : Ratnagiri Chemicals Pvt. Ltd.
Head Office:
611 / 612, Raheja Arcade – 6th Floor
Sector –11, CBD Belapur,
Navi Mumbai – 400 614 Maharashtra, India.
Telephone No: +91-22-27570236, 27570191
Fax No : +91 – 22 –27570060

Factory:       
C-39, MIDC Lote-Parshuram Indl Area
Lote - 415722
Maharashtra, INDIA
Telephone No: +91-2356-272650
Fax No : +91-2256-272117

Chemical name : Phenol,2,2’-methylenebis[6-1,1-dimethylethyl)-4-methyl-
Product use : Antioxidant for natural or synthetic rubber.
Molecular Formula : C23H32O2
Molecular weight : 341.00
Synonym(s) : Phenol,2,2’-methylenebis[6-1,1-dimethylethyl)-4-methyl-

 

Section 2 – COMPOSITION, INFORMATION ON INGREDIENTS :

Weight

Component

CAS Registry No

EC no

  98 %

22M46

119-47-1

204-327-1

 

Section 3. HAZARD IDENTIFICATION:

AT ELEVATED TEMPERATURES , VAPOR MAY CAUSE IRRITATION OF EYES

AND RESPIRATORY TRACT.

may cause long-term adverse effects in the aquatic environment

 

Section 4. FIRST AID INFORMATION:

After inhalation: fresh air.

After skin contact: wash off with plenty of water. Remove contaminated clothing. After eye contact: rinse out with plenty of water with the eyelid held wide open. Call in ophtalmologist if necessary .

After swallowing: immediately make victim drink plenty of water. Call in physician.

 

Section 5. FIRE FIGHTING MEASURES:

 Suitable extinguishing media: Water, CO2, foam, powder.

Special risks: Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.

Special protective equipment for fire fighting: Do not stay in dangerous zone without self-contained breathing apparatus.

Other information: Prevent fire-fighting water from entering surface water or groundwater

  

Section 6. ACCIDENTAL RELEASE MEASURES:

Person-related precautionary measures: Avoid substance contact. Avoid inhalation of dusts. Ensure supply of fresh air in enclosed rooms.

Environmental-protection measures: Do not allow to enter sewerage system. Procedures for cleaning / absorption: Take up dry. Forward for disposal. Clean up affected area. Avoid generation of dusts.

 

Section 7. HANDLING AND STORAGE:

Personal Precautionary Measures: Avoid breathing vapor from heated material. Avoid contact with eyes, skin, and clothing. Use only with adequate ventilation. Wash thoroughly after handling.

Prevention of Fire and Explosion: Keep from contact with oxidizing materials.

Minimize dust generation and accumulation.

Storage: Keep container closed. This material may be used in food. Protect from contamination. Do not store or ship together with odorous substances, toxic substances.

 

Section 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION:

Ventilation: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Respiratory Protection: If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn.

Eye Protection: Wear safety glasses with side shields (or goggles) and a face shield. Wear a full- face respirator, if needed.

Skin Protection: Wear chemical-resistant gloves, footwear, and protective clothing appropriate for the risk of exposure. Contact health and safety professional or manufacturer for specific information.

Recommended Decontamination Facilities: eye bath, safety shower, washing facilities.

 

Section 9. PHYSICAL AND CHEMICAL PROPERTIES:

Sr.No

Property

Typical Value,Units

01

Appearance

White to off white powder

02

Melting range [°C]

128-132

03

Density

1.08

04

Water solubility [mg/lit]

0.02

 

Section 10. STABILITY:

 Stability: stable.

Incompatibility: Material reacts with strong oxidizing agents.

Hazardous Polymerization : Will not occur.

 

Section 11. TOXICOLOGICAL INFORMATION:

 Oral LD-50:(rat)                               5000 mg/kg

Oral LD-50:(mouse)                     11000 mg/kg

Dermal LD-50: (guinea pig)            > 8,000 mg/kg

Skin Irritation (rabbit)                   not irritating

Skin Sensitization[human)              none

 

Section 12. ECOLOGICAL INFORMATION:

 Oxygen Demand Data:

 NO DATA AVAILABLE

 

Section 13. DISPOSAL INFORMATION:

Discharge, treatment, or disposal may be subject to national, state, or local laws. Incinerate.

 

Section 14. TRANSPORTATION INFORMATION:

 DOT [USA] : Class not regulated

 Sea – IMDG [International Maritime Dangerous Goods]: Class not regulated

 Air – ICAO [International Civil Aviation Organization]: Class not regulated

 

Section 15. REGULATORY INFORMATION:

 NOT AVAILABLE

 

Section 16. OTHER INFORMATION:

For additional information concerning this product, contact the following:

PRODUCT EMERGENCIES

 

Ratnagiri Chemicals Pvt. Ltd.
Head Office:
611 / 612, Raheja Arcade – 6th Floor
Sector –11, CBD Belapur,
Navi Mumbai – 400 614 Maharashtra, India.
Telephone No: +91-22-27570236, 27570191
Fax No : +91 – 22 –27570060

Factory:       
C-39, MIDC Lote-Parshuram Indl Area
Lote - 415722
Maharashtra, INDIA
Telephone No: +91-2356-272650
Fax No : +91-2256-272117

 

The data and recommendations presented in this data sheet concerning the use of our product and the materials contain there in are believed to be accurate and are based on information which is considered reliable as of the date hereof. However, the customer should determine the suitability of such material for his purpose before adopting them on a commercial scale. Since the use our products by others is beyond our control, no guarantee, express or implied, is made and no responsibility assumed for the use of this material or the results to be obtained there from. Information on this form is furnished for the purpose of compliance with Government Health and Safety Regulations and shall not be used for any other purposes. Moreover, the recommendations contained in this data sheet are not to be constructed as a license to operate under, or a recommendation to infringe, any existing patents, nor should they be confused with state, municipal or insurance requirements, or with national safety codes.

  • Para Cresol alkylation products ( rubber antioxidants) are the new area of development and focus for the company.
  • Green and environment friendly technology is under development for methylation.